Hobbycraft Flower 3D Punch - Table Decorations

I am a big Hobbycraft fan and not getting paid for using their name on here often. I use a lot of their stuff, because it is usually decent quality at okay prices. Yes, there are cheaper places out there, but the convenience of simply getting on my bike and being surrounded by craft products within 10min is also a big factor in my decision to use the chain a lot.

As with everything, though, you have to be careful what you buy. I would not, for example, buy a set of 'craft' egg carton when I get a new one for free with my eggs every week. Or a set of 8 paper plates for £1 when I am sure that elsewhere I can get 30 for £1.50.






When I came across the flower craft punch for £6 I thought it would be the ideal, easy table decoration. I bought the craft punch and some red card and set about making flowers whenever the feeling that I should really work on that wedding got a bit too intense, but I was too tired to think greatly about what I was doing.

Now, the flowers are adorable. They are the right size not to look tacky, they are even and the slight 3D effect really gives them a quality edge. They will look great with our white table cloths and burgundy chair covers in a castle-style reception room. And the best part is that it almost feels like I made them for free! (Yes, I bought card and the craft punch, but can you imagine how much sufficient amounts of confetti bags would cost you for 10 tables?)

However, I found the craft punch itself to be a bit of a disappointment for what is, in essence, a lot of money. It seems sturdy at first, but being made almost entirely of plastic, it was not durable. It broke before I had gone through 6 out of 10 sheets of card. It automatically cuts out holes within the flowers and there is no way of knowing where those extra bits of card end up until you realise that you are expected to empty the top regularly, which I did figure out quite quickly. Failing that, the craft punch would get jammed after about 15 punches. Apart from the top, you cannot open the punch up to get rid of the jam, which meant laborious use of scissors to remove any stuck card from the tiny gap where the card is inserted.

The metal bar around which the top pivoted attempted escape after every punch, meaning that it had to be put back into place in regular intervals. But as it was surrounded by plastic, the force needed to cut the flowers proved too much for the craft punch, and after barely 5 sheets it was clear that the punch would not last. I filled in the breaking bits of plastic with my glue gun in an effort to make the punch last longer, but even so it broke during the punching of the 6th sheet.

I have since looked on the website and should have done my research better. Whilst the reviews for this particular craft punch are good - mainly because of the quality of the flowers - almost all the other, similar punches have had bad reviews saying that they, too, would break easily. In one of the reviews a fellow craftie stated that they had been told that the design of the punches had changed recently, and it is clear from the reviews that the change hadn't been for the better.

We will manage with fewer flowers as I am reluctant to buy another craft punch from there (my daughter's has now also broken) and unfortunately the receipt has gone walkies, so I can't return either of them. Lesson learned: do your research before you buy expensive items. The flowers are still lovely, though.

What has happened so far...

This week has been a busy one. We have sorted the rings (palladium bands, his wide with 2 diamante cuts and mine smaller with 2 cuts and a matte middle), the cake (though apparently 2 months is very short notice), my shoes (these beauties from Irregular Choice), my veil, his fittings and the rest of the pin-on roses for family members. I am now back on the dress sewing and have attached all the pinned-down bits, as well as cut the extra fabric off to prevent extra layers making me look bigger than necessary. I am currently sewing the modesty plate as a little bit of 'light' work before cutting more fabric tonight after my significant other has gone to bed and potentially even pinning it into place. We'll be meeting a few people over the next couple of days, and with guests staying over yet again I'll have to tidy what has generally become known as THINGS away until the final week before work resumes.

For those of you still looking for a few bits of inspiration, I have taken on my future mother-in-law's advice to use stiffening fabric inside the modesty plate to give it a little bit of shape. The plate itself is cut in a trapezium shape, 12cm at the top and 9cm at the bottom and encased in the same satin my dress is made from. Two satin ribbons either side of the outwardly-sewn end are attached to some Velcro hooks, which will find their opposite inside the dress. The hooks are on the modesty plate part, so that it won't scratch my back if slightly undone during the day.

P.S. - Almost 1000 views - Thank you everyone!

Family Flowers

I have been lectured on the importance of family members wearing flowers bearing a resemblance to the bridal bouquet, so I decided that I should get on with it whilst I still have some practice with the flower making.


The first two are smaller versions of the original as they are for children, but the principle for each flower will be similar: satin rose on a short stalk, metal beads around a white mini rose and 3 wired diamantes, with brooch bars attached to the back in case they don't have button holes to stick the flowers through.

Alterations for the women will be white roses instead of satin, diamantes in the rose and a silver mini rose instead of the white one.

The Finished Bouquet

We have a new house, yay!!! In the wake of the great news, I have finished the bridal bouquet.

 
Together, this has been made from 13 white satin roses, 5 red satin roses, 5 self-adhesive gem stones I had lying around and a few leftover tiny silver roses from the invitations.

I have wrapped some more red satin around the stems as the floral tape is rather sticky and the last thing I'll need on the big day are sticky hands!

How to Make: Satin Roses

Originally, this task was meant to be outsourced to my future mother-in-law, but as her confidence faded with a picture I have shown her of what I want, I have taken on the task myself.

They can be a little fiddly at first, but once you have managed to do one it gets easier all the time.










All I used per rose was a thin piece of floral wire, floral tape, a pipe cleaner, needle and thread, a glue gun and broad satin ribbon.







First, fold the edge of the ribbon over to create a triangular shape.Next, fold the other edge down to create another triangle and fasten the edge with needle and thread.

Twist the ribbon and wrap around the triangle, then fasten at the bottom. Repeat until you have a rose shape. Cut the ribbon off at the desired length and sew the edge to the closest 'petal'.

Twist the top of the wire to make a loop at 90 degrees away from the rest of the wire. Hold a pipe cleaner against the wire; if necessary, twist it around the wire a few times to hold it in place. Wrap floral tape around both to cover the entire length and the loop.

Apply glue to the top of the wrapped loop with a glue gun and attach the rose head.

Repeat for as many flowers as you desire.
They look beautiful and are guaranteed not to wilt on your big day.

Fabric Draping - The dress is back!

We have spent the last few days house hunting and have finally found something promising, which we will try to secure on Monday. This has meant that - predictably - a lot of attention and focus had to be diverted from the wedding preparations, save for little items like the frames and the flower-shaped confetti, which will be strewn across the tables.

However, today is Sunday and that means that Estate agents are shut, so there would have been nothing to do but wait around. I decided it was time to stop being down (it's what losing your home does to you) and get back on the horse, so to speak.

With the corset inner done, the daunting task of actually draping the outside of the fabric awaited. It turned out to be easier than I thought it would be. I cut my satin to a rectangular shape since I had no idea what I needed, but needed to start somewhere. I then applied Fraystopper to the edges, since whilst sharpening my scissors on sandpaper brought some cutting relief, the material still frayed like mad.

Using up all my available pins, I shaped the fabric around the inner, starting with the top of the bra straps and finishing under the bust. Each time, I folded a small portion of the fabric to cover part of the previous section, in the hope that this could cover up any sewing faults, which it did. I then sewed the edges of the folded material together - in a line at first, which turned out to be a bit of a mistake, then just at points where the material met or needed support in staying in shape, which showed some promise. I am not too worried about the messy top and whatever the material will look like under my bust, as I am making shoulder and belt appliques which will cover all that up.

So things are looking up on all fronts and I hope that this trend is set to continue.

Wedding Table Decor - Table Numbers

Amid all the sadness over being forced to move house and the seemingly impossible search for a new home somewhere close to my child's new school, the wedding preparations cannot be neglected. I have to say, I was in little mood to do anything yesterday, so I decided it was time to finish the table number frames - an easy, quick project with decent results.














I bought the frames just before our holiday. ASDA had a sale on the frames - each cost half its original price. We managed to get 9 heart-shaped frames and one rectangular one, which we wanted to reserve for our table. The paint was a small pot of Wilko's own brand and more than sufficient for our needs - I could even have gone with the smaller one.

The concept is simple enough: unwrap, paint the inside and re-insert after the frame inner has dried. Acquire chalk and draw as required. The wire cutter was my unwrapping aid as I could not find any of my many pairs of scissors.

So it doesn't just rain...

We've just come back from a little holiday to discover that we will have to move house within the next 2 months as our landlord wants to move into our property. Within the next 2 months. We will be getting married in about 2 months and a half.

So now add to the stresses of organising a wedding - minutely planned and work scheduled so far - to the stresses of packing everything up, finding a property, cleaning the place out, moving into a new property and unpacking, ready for October. Not to mention the cost of the whole thing, which will be added on to the already sky-high cost of the wedding. Or the upset that this has caused us, and - more importantly - my child, at losing our home, which we have only settled into a year ago.

Oh my dear lord.